4 spindle entry level turret rewinder

The LCTR is ideally suited for turret rewinding of standard self-adhesive label products. The machine is made to a fixed specification, which results in a very competitive entry-level price. Using the latest technology in inverter drives, the rewind mandrels are driven by A. C. motors capable of producing finished roll hardness (tension) equal to turret rewinders using electro magnetic clutches. As with all new generation Vectra turret rewinders a great deal of attention has been given to reducing set up and make ready time, enabling the machine to be used for shorter run lengths.

4 spindle turret rewinder with drive option

The basic ECTR machine includes all the features and benefits of the LCTR. However, unlike the fixed format LCTR the ECTR machine is designed and built so that it can be expanded to a higher specification. Features such as servo drive and closed loop tension control can be specified which enables the machine to produce a much wider range of products/substrates and rewind at lower tensions.

4 spindle turret rewinder for advanced application

The Servo drive Vectra turret rewinder is the most technically advanced turret available today. Primarily the STR has been designed to produce a quality product with little input from the operator. The STR has many new features and boasts a change over time of approximately 10 minutes. With the Nordson core gluing system a minimum cycle time of 10 seconds is possible. The latest touch screen H.M.I unit with its graphical representation of all setting parameters eliminates the use of multi lingual text and assists the operator with job set up and error messages.

4 spindle turret rewinder for advanced application with built in slitter

The STRS shares all the features and benefits of the STR with the addition of a built in slitting module which can be used with the standard STR. The choice of slitting/turn bar options depends upon the customers individual needs.

The standard rotary scissor slitting unit consists of the following features:
Quick release knife and anvil drive shaft for offline setting
Automatic lateral and vertical movement of the top knives
Cross web adjustment

2 or 4 spindle turret rewinder for heavy duty / large diameter rewinding

The 4 spindle heavy duty Vectra turret rewinder is a semi-automatic machine intended for continuous winding and to be installed in-line with a range of roll to roll label printing presses without any mechanical or electrical interfacing.

This machine can wind rolls up to 350mm diameter in 4 spindle mode and 500mm diameter with 4/2 option. The maximum web width is 330mm, 410mm or 510mm wide, on a range of core sizes from 25mm to 150mm diameter. It can be set to wind a given amount of material, pre-selected as a linear measurement or label quantity, then cut the web and automatically transfer the cut end to a new pre-glued core without stopping or slowing down the parent machine. The finished rolls are automatically ejected onto a loading arm for easy removal.

4 spindle glueless / coreless turret rewinder

The Glueless Start Vectra has been designed to satisfy the increasing demand for a clean breakaway of labels from the core. The unique glueless system automatically holds the labels to the core at the start of a new roll without stopping the converting equipment.

This unique system boasts the following advantages:
No hot melt core glue bath - eliminates stoppages to refill
the system
Quicker set up time (no glue transfer wheels to set)
Guaranteed to be no glue deposit on the substrate
Coreless rewinding is possible when fitted with special
mandrels

Glueless start turret rewinder for advanced applications

The Servo Drive Glueless Start Vectra not only holds the substrate to the cores at the start of a new roll without stopping or slowing down the converting equipment, it can also be fitted with a print and apply label application to close the finished roll with a label. A thermal transfer printer can print fixed or variable data to the roll closure labels, The printed labels are collected onto a unique mechanism (patent pending) that applies the labels in one movement to all the finished rolls. The label applicator is fully programmable at the machine touch screen to suit each individual job requirement.